The smart-home changes I find most appealing often have a very ordinary purpose. Turning a suitable lamp on at the right time can be more useful than adding another complicated dashboard. The Meross Smart Plug Mini interests me in that role: a small switch that can become part of an existing Apple Home routine.

Quick verdict

I would shortlist it for the focused role described here.

Best for: Two suitable US lamps or other supported loads with understandable switching routines.

Main benefit: Two suitable ordinary appliances can gain a simple on/off role inside an Apple Home routine.

Biggest drawback: It does not measure energy, and the appliance's restart behaviour and current Apple home-hub requirements remain important.

Meross MSS110HK Smart Plug Mini, white, US 15A, two-pack

Amazon US · US

Check price and availability: Meross MSS110HK Smart Plug Mini, white, US 15A, two-pack at Amazon US

Reviewed version: Meross MSS110HK Smart Plug Mini, white, US 15A, two-pack

Compatibility: The US MSS110HK HomeKit model, suitable 120V loads within the documented rating and 2.4GHz Wi-Fi. Use Apple's current supported HomePod or Apple TV home-hub guidance for remote access and automations.

Review context: I assess one-appliance setup, physical button access, network requirements, schedule ownership and checks after a power interruption.

I would choose the appliance and the desired behaviour before choosing the plug. If the appliance cannot resume its intended state after receiving power, switching the socket may not solve the problem. This is an important difference between controlling electricity and controlling everything the attached product can do.

Meross Smart Plug Mini in the verified product gallery, view 1

This is the HomeKit two-pack

Product images: the verified retailer gallery and any original manufacturer illustration credited in the sources. These are not personal test photographs.

The selected US offer contains two white MSS110HK plugs. This is the HomeKit model, rather than a generic promise that every Meross plug uses the same platform. I would keep the model and pack size on the order, especially when comparing similar-looking offers.

Meross’s MSS110 specifications describe 2.4GHz Wi-Fi and a US rating of up to 15A. They also state that energy monitoring is absent. I would treat this as a switched outlet, not a way to measure exactly how much power a device consumes.

The regional version matters as much as the software platform. The selected offer is for the US electrical arrangement. I would choose a properly supported local model for another country, rather than turn a permanent smart-home installation into a chain of travel adapters.

Start with one clear routine

I would begin with one lamp and one simple action. A useful device name and room assignment make both voice control and the Home app easier to understand. Calling every new accessory something similar creates confusion that no automation engine can repair for the people living with it.

I would also keep ordinary manual operation practical. A guest should not need my phone to turn off a light. The plug’s physical button is useful, but its position still matters when the socket is behind furniture. A compact product is only convenient if I can reach what I need.

The second plug can then serve a separate, equally clear job. I would avoid adding several overlapping schedules on the first evening. Starting with a small routine makes it much easier to understand which command is responsible if the result differs from the intention.

Apple Home needs the complete home

The plug does not require a separate Meross radio bridge for its Wi-Fi connection. That should not be confused with the requirements for controlling Apple Home while away or running its wider home features. I would plan those as separate layers of the setup.

Apple’s current home-hub guidance points to a supported HomePod or Apple TV for the hub role. I would follow that current guidance rather than older plug advertising that lists an iPad as a home hub. An iPad can be a controller without being the current hub solution.

I like the idea of keeping simple routines inside the home platform I already use. Even then, I would confirm how the chosen schedule is created and maintained. A timer saved in one app and an automation created in another are different things to remember when changing the household’s routine.

Meross Smart Plug Mini in the verified product gallery, view 2

Wi-Fi setup deserves a calm start

The 2.4GHz requirement needs to match the actual network. I would perform initial setup near a sensible signal and follow the current instructions for the exact plug. A phone having internet access does not prove that every accessory can join the same network configuration.

I would keep the setup code and a useful record of the device’s location. That makes a future reset or household change less frustrating. I would also install supported firmware updates through the manufacturer’s documented process, while allowing time to confirm that the ordinary control still works afterwards.

For a product that will sit behind furniture, I would think about recovery before hiding it. The reset control, outlet and network should remain serviceable. A plug that is easy to install but difficult to reach later can make a small household change unnecessarily awkward.

The load and its restart behaviour matter

A maximum current label is not an instruction to connect any appliance that happens to have a compatible plug. I would check both products’ guidance, the type of load and the intended unattended operation. A simple lighting job is a clearer starting point than an appliance whose controls and operating conditions need special attention.

After a power interruption, I would check the actual return behaviour of the complete arrangement. The useful question is whether the appliance, plug and automation resume the intended state together. I am not claiming a completed outage test or a guaranteed recovery time in this review.

If the goal is saving energy, a schedule may help avoid unnecessary operation, but it cannot quantify the result here. I would choose a documented metering product if measurement is the buying requirement. That keeps a useful on/off switch from being sold as an instrument it is not.

Where another approach fits better

A suitable smart bulb can offer dimming or colour control that a switched outlet cannot provide. Conversely, I would choose this plug when the existing lamp and its ordinary switch already suit the room. Changing the smallest useful part of the setup appeals to me more than replacing everything at once.

For a physical button on an appliance, the SwitchBot Bot is a different kind of solution, with its own mechanical-fit requirements. I would compare the actual action needed rather than assume all smart-home accessories are interchangeable.

My buying decision

Meross Smart Plug Mini in the verified product gallery, view 3

I like the MSS110HK as a focused HomeKit purchase for two suitable US appliances. Its appeal is straightforward switching inside an understandable routine. I would buy it for that job, with supported Wi-Fi and the right Apple hub arrangement, while choosing another product if energy measurement, dimming or a different regional socket is the real need.

What worked

Two suitable ordinary appliances can gain a simple on/off role inside an Apple Home routine.

What bothered me

It does not measure energy, and the appliance's restart behaviour and current Apple home-hub requirements remain important.

Who should not buy it

It does not measure energy, and the appliance's restart behaviour and current Apple home-hub requirements remain important.

Alternatives I would consider

A compatible smart bulb. I would choose it when dimming or colour, rather than whole-socket switching, is the purpose.

SwitchBot Bot. I would compare its physical-button approach when cutting and restoring power cannot perform the intended action. Read my SwitchBot Bot review.

Evidence and sources

Specifications are attributed to the linked documentation. Images: Amazon product gallery and manufacturer illustrations. These are not personal test photographs or measurements.

Features, compatibility and rated figures from the maker are manufacturer information. My opinions are identified in the review.

Conclusion

Worth considering for focused switching; choose a different product for dimming, measurement or another country's socket.

Meross MSS110HK Smart Plug Mini, white, US 15A, two-pack

Amazon US · US

Check price and availability: Meross MSS110HK Smart Plug Mini, white, US 15A, two-pack at Amazon US
Get the best articles from Think Different

One email a week with practical Mac workflows, useful comparisons and honest tech recommendations.